Our worm equipment reducers offer an option of a good or hollow output shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, nevertheless, can endure shock loading better than other reduction gearbox styles, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s speed reducer product line – has been serving industry reliably for over 40 years. Its proven modular design has set the sector standard for efficiency and may be the most imitated product in the current worm gear swiftness reducer marketplace. But why settle for a knock-off when you can have the initial – from EP Gear.
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, top and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, as well as greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings are available in our eCatalog.
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high input speeds, or when gearmotor efficiency is important. Get in touch with our technical sales staff for help identifying which gearbox remedy is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and allow for a corner switch with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting choices providing flexibility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The proper angle bevel gearbox combines the top features of our correct angle worm and planetary inline reducers. With a solid and efficient right angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox will come in 18 ratios ranging from 5:1 to 1000:1, and it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our velocity reducers. These gearboxes are made to manage varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest efficiency and best result torque of most our velocity reducers. These gearboxes are made to deal with varying loads with small backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we have a solution to suit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the best choice for continuous duty applications. Their equipment cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work well in conditions with limited space. Our parallel shaft equipment reducers offer an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes feature a gear arrangement when a equipment in the type of a screw, also called a worm, meshes with a worm equipment. These gears are typically created from bronze and the worms are metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A primary benefit of worm gear reducers is definitely that they generate an output that is 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Most often, a worm gearbox has right hand threads; to improve the direction of the result, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
To see a complete description of Worm Reduction Gearbox click below.